Gainesville, FL Alachua County · Florida
Open Mon–Sat · 8a–5pLicensed · Insured(352) 665-8022
Doors · Gainesville

Door Refinishing in Gainesville.

A front door sets the tone for the rest of the exterior, and it is also the part of the paint job that takes the most abuse from sun, rain, and use. We strip what is failing, sand back to a workable surface, prime where it counts, and finish with a coating built for doors. Most single doors are done in one to two days.

Refinished dark front door inside an arched stucco entry with cream sidelights
Doors · Recent work
Scope

Everything in the scope.

What gets covered in every doors job. Itemized, in writing, before we start.

01

Front entry doors

Painted or stained front doors stripped of failing finish, sanded, primed where needed, and recoated. Hinges and hardware come off so edges and joints get the same finish as the face.

02

Trim and frames

Door frames, casing, jambs, and the threshold get the same finish as the door so the entry reads as one piece.

03

Screen and storm doors

Aluminum or wood screen and storm doors refinished in place or off-site if needed. Frames masked and re-keyed if hardware swaps are part of the job.

04

Garage doors

Sectional steel or wood garage doors washed, sanded for bond, and rolled or sprayed with a coating built to handle Florida sun.

05

Interior doors

Bedroom, bath, and closet doors stripped down, primed, and brushed with a higher-sheen door enamel that wipes clean.

06

Hardware re-install

Knobs, hinges, deadbolts, kickplates, and weather seal back on or upgraded. Door swings checked so nothing rubs.

Method

How a doors job runs with us.

Same sequence on every project. The owner is on site through all of it.

01Step
Walkthrough
Look at every door in scope. Talk through color, sheen, and whether hardware stays or gets upgraded.
02Step
Hardware off
Hinges, knobs, deadbolts, kickplates removed and bagged. Numbered so each piece goes back where it came from.
03Step
Strip and sand
Failing finish stripped or sanded back to a sound surface. Bare wood spot-primed. Stained or painted doors prepped for the right primer.
04Step
Prime
Bonding or stain-blocking primer where the substrate calls for it. Skip this step and a tannin-rich door bleeds through within a year.
05Step
Finish coats
Two coats of a higher-sheen door enamel, brushed for clean lines on rails and stiles. Sprayed on garage doors when it makes sense.
06Step
Reinstall
Hardware back on, hinges adjusted, weather seal seated. Every door opens straight and closes cleanly.
Why a door is different

A door is the hardest-working painted surface on the house

Front doors take the full hit of sun, rain, hand traffic, and slamming. That is why a door finish that holds for ten years on the siding will fail in two on the door. Door refinishing uses harder coatings, more thorough prep, and a different primer system than the rest of the exterior. Done right, the door is a feature; done wrong, it is the first thing to fail.

Pricing

What affects the price.

Door condition and stripping requirements are the biggest cost drivers. A painted door in fair shape is fast. A weather-blistered door, a stained door that needs stripping, or multiple old layers add prep time. Scope is quoted per door at the walkthrough.

Every job is quoted in writing after a walkthrough. No verbal estimates, no surprises after we start.

Proof

Recent work + what customers said.

01
Google

"I am so glad we found A+ painting. Chris and his team painted our whole house in Gainesville (interior) in under 3 days — ceilings, walls, doors, trim. They were punctual, priced right, and everything was done perfectly. They are really…"

Steve Stokely

02
Google

"Chris and his A+ crew did a fantastic job on the interior of our house. It transformed the whole look, we love it! They were punctual, detailed and his price was extremely fair. Recommend HIGHLY!!!"

MH

03
Google

"Chris and his team did a wonderful job. The quote was detailed and accurate. The team was friendly and helpful. The job was completed on time and with great quality. We would definitely choose them again!"

Christy Evans

Frequently asked

Questions, answered.

01How long does it take to refinish a front door?
A single front door takes one to two days depending on the existing finish. A painted door in fair shape can be done in a day. A weather-blistered door, a stained door losing its UV protection, or a door with multiple old layers that need stripping takes two days so primer and finish coats have proper cure time between passes.
02Can you refinish a stained wood door or do I have to paint it?
Yes, we can refinish a stained wood door without painting it. Stained doors are stripped of failing finish, sanded back, and recoated with a stain plus a UV-protective topcoat. We talk through the existing wood and finish during the walkthrough so you know what is realistic before any work starts.
03Do you take the door off to refinish it?
For most refinishing jobs the door stays on the hinges so it can dry between coats without being moved. Hardware comes off, the frame gets masked, and we work the door in place. For heavier strips or for screen and storm doors that need both sides finished evenly, the door comes off and finishes on sawhorses.
04Will the new finish hold up to Florida sun?
Yes, with the right primer and topcoat the finish holds up to Florida sun. Front doors facing south or west get the hardest UV exposure in Gainesville and need a coating built for it. We choose products specifically rated for door applications and exterior exposure so the finish does not chalk or fade in the first season.
05Can you match the existing door color?
Yes, we match existing door colors during the walkthrough using a paint chip, a photo, or a sample taken off the door. We match across the major paint brands and confirm the color in writing before the job starts so there are no surprises when the topcoat goes on.
06Do you refinish garage doors too?
Yes, we refinish steel and wood garage doors. The process is similar to a front door — wash, sand for bond, prime where needed, and two coats of a door-rated finish. Garage doors get a higher-sheen coating since they handle more direct sun and grit than an entry door.
Pairs well with

Often booked alongside.

01Exterior PaintingFull exterior repaints engineered to handle Florida sun, humidity, and afternoon storms.02Wood StainingInterior and exterior staining for decks, fences, doors, and trim that brings out the grain.
Where we work

Doors across Alachua County.

Owner-operated, licensed, insured. doors jobs in every neighborhood we work.

Don't see your neighborhood? We work the surrounding parts of Alachua County too — see the full service area.

The Last Word

Ready for a doors quote?

Walkthrough is free. Written quote inside forty-eight hours.